Installing a Lowrance 7TI on a Hobie Outback

Hey guys James Snyder here with the Headwaters Fishing Team. I recently upgraded to the Lowrance 7 ti want wanted to give a detailed how to on what i used and how i did it.

Parts used-
Lowrance 7ti
http://www.lowrance.com/en-US/Products/Fishfinder-Chartplotter/elite-7-ti-en-us.aspx

Heavy duty Ram Mount 1.5 ball
 http://www.rammount.com/part/RAM-101-LO11

Yak Attack 1.5 ball
 http://www.yakattack.us/SB15_12_p/sb15-12.htm

Yak Attack Gear tack - cut to fit
http://www.yakattack.us/GT90_08_p/gt90-08.htm

Berley Pro total scan transducer mount
 https://www.berleypro.com/product/totalscan-ready-transducer-mount-suits-hobie/

12v 22ah battery
https://www.amazon.com/Rechargeable-Replacement-KEYKO-KT-12220-Terminal/dp/B01LXNS894/ref=sr_1_9_a_it?ie=UTF8&qid=1481936088&sr=8-9&keywords=12v%2B22ah&th=1

water proof quick connector
https://www.amazon.com/Huicocy-Waterproof-Electrical-Connector-Marine/dp/B01DILSJ0A/ref=sr_1_1?ie=UTF8&qid=1481936117&sr=8-1&keywords=12v+waterproof+connector

Ring terminals
 https://www.amazon.com/Gardner-Bender-10-106-Terminal-Yellow/dp/B000LNOJYY/ref=sr_1_8?ie=UTF8&qid=1481936143&sr=8-8&keywords=ring+terminals

silver soldier
https://www.amazon.com/Kester-83-4000-0000-Solder-Pocket-Diameter/dp/B00068IJNQ/ref=sr_1_4?ie=UTF8&qid=1481936172&sr=8-4&keywords=silver+solder

heat shrink tubing
 https://www.amazon.com/JawayTool-Assortment-Electrical-Connection-Diameters/dp/B018G6CQAG/ref=sr_1_1?ie=UTF8&qid=1481936194&sr=8-1-spons&keywords=heat+shrink&psc=1

Hobie through hull kit
 http://www.austinkayak.com/products/12509/Hobie-Thru-Hull-Wiring-Kit.html?utm_source=google&utm_medium=cpc&utm_campaign=Shopping:%20ACK%20PLA&scid=scplp292988&sc_intid=12509_10705_1&gclid=CI3C39GD-tACFQ6Zfgod9ikMIA

Hobie Multi wire through hull kit

http://www.austinkayak.com/products/19399/Hobie-Thru-Hull-3-Way-Wiring-Kit.html

soldiering iron

phillips screw driver 

after unpacking everything i took my quick disconnect and the fuse holder provided with the fish finder and tinned the ends 

useing the silver soldier i prepped the wires by adding soldier to the wire tips (tinning)

i heated both of the wires to allow the soldier to become fluid and joined the two wires together and let cool

pro tip: apply heat shrink to the wires before soldiering-
i then soldiered up the power cable to the other side of the quick connector in the same way

add ring terminals to the positive and negative wire and test fit on the battery.

i had a lowrance elite 4 hdi allready installed and needed to remove the power and transducer from that unit as well as the old ram mounting system

unscrew the 3 mounting screws on the lowrance transducer cover

this is what happens when you dont clean out your transducer correctly

remove the wireing from the old transducer

you can see here why a berley pro transducer mount is required

sorry its upside down ill fix later- full kit from berley pro- extremely well made!

attach total scan transducer to the mounting plate using supplied screws from lowrance kit

reinstall transducer mounting plate and traducer cover with original screws and screws from the berley pro kit. 

using the Hobie through hull kit run  the wire from under the kayak through the kayak

run all 3 wires from inside of hull using the Hobie 3 wire through hull kit and install ram mount with yak attack 1.5 ball

the lowrance 7ti mounts easy on the ram mounting arm 

hook up the battery and connect connectors to fish finder and turn on

this unit is very popular for kayak fisherman!

the lowrance 7ti is a fairly easy install with the kit i have assembled here and i hope this helps you in your future fish finder installs. i will follow this up with a review on the system after i have a month or 2 of using the unit and have first hand knowledge of how it works. thanks for taking the time to read my install guide and if you have any questions feel free to hit me up on Facebook or Instagram
Facebook - James Snyder
https://www.facebook.com/james.snyder.739?fref=ts
Insta- Yakin_James

also look for more awsome how toos and product reviews here on our team blog and dont forget to give a like to
Headwaters Kayak shop
https://www.facebook.com/headwaterskayak/
Headwaters Fishing team
https://www.facebook.com/Headwaters-Kayak-Fishing-Team-303065546417594/?fref=ts
and follow us on you tube
https://www.youtube.com/channel/UCYodbaugFoQAvGL2StgQ3tQ


thanks for checking us out! - James Snyder Headwaters Kayak Fishing Team

Winter Jigging for Bluegill By Matthew Guthrie

 On December 11th and 12th I got the chance to head out to Village West Marina in Stockton. I originally went out to catch bass and striper but they didn't want to cooperate, so I went in the marina and started looking for crappie or anything else that would bite. I started seing clouds of fish on my fishfinder and proceeded to drop my lure right on their heads. They didn't seem to like the crappie jigs or my little trout worms so I started jigging my kastmaster and immediately hooked up with a nice bluegill. I couldn't keep them off it!

Average to large sunfish on a golden kastmaster

 I was using a 1/16 oz kastmaster to tempt the feisty fish in about 10ft of water. I started with a gold color, witch they ate, but I switched to a silver and chartreuse and started catching a lot more fish. Jigging it up and down worked really well, but I also found that if I got a bite and missed it, to just drift with it and the slow flutter drove them crazy. The average size of these fish were between 6 and 8in with some of the bigger ones pushing 11. There are no shortage of these fish in the marinas.

These little fish are a ton of fun when everything else has stopped feeding from the cold. So pick up some small shiny lures and hang on, Bluegill put a awesome bend into an ultralight rod and when you are fishing little baits like this you never know what you might hook into. Hope this puts some fun into your winter, Happy Fishing!

Kauai Class Kayak and Canoe Fishing Tournament Trip Report

Here on Kauai summer is in full swing, the mantra lucky we live Hawaii resonates with us everyday we wake up to the trade wind breezes and greet the sunrise over the vast Pacific Ocean. We live in a waterman's paradise. This August we "the Seasoljahs", a dedicated group of ocean users committed to sustainable and ethical ocean recreation and harvest. Held our annual sustainable fishing tournament inviting paddlers and peddlers of all types of human powered vessels to participate in this community event which was held as a fundraiser for a little girl left behind after a devastating tragedy left her an orphan. 

Entry's were coming in from outrigger canoe paddlers,  kayakers, hardcore kayak fisherman, shoreline fishermen on borrowed kayaks to women and kids! With five prize divisions, awards in three places, and two bonus divisions everyone had a chance to take home some great prizes, and everyone went home with a raffle prize! We were very humbled by the many local, and international sponsors and 50+ participants, some even shipping kayaks from off island.

The weekend was upon us as final tournament preparations were under way. We gathered up our gear and headed out to camp at one of our favorite beaches. The setting moon, shooting stars, and sound of the waves made for a great night sleep. Until about 4:00 am when we started prepping our boats for launch. On the water at first light is one of the best feelings,just you and the vast ocean with the expectation to be ready for the unexpected as anything can happen in the middle of the pacific. Word was coming over the radio that some impressive fish were coming up including two Ono by the legendary unkle Bobby on a monofilament leader and a wall mart lure! More ono's were coming up along with a mixed bag of uku, tunas, and jacks. Word of a big Ono maybe the tournament winner getting taken by sharks at the kayak and a double tuna hookup with both getting hit by sharks was just a few of the many trials and tribulations along the way. 

At the weigh in, it was like Christmas in August with good food, big fish great prizes, stories,and onlookers. Prizes were awarded to 15 anglers and good times and tight lines were had by all. Aloha

Feelfree Kayaks new Overdrive Pedal System

This July Nick Cohoons and I had the privilege to fly out to Orlando Forida and attend the 2016 Icast fishing show. This was definitely the year of the pedal drive with almost every major manufacturer bringing a pedal option to market. In a field stacked with innovative designs the one that really set itself apart was the new Feelfree Overdrive system. Several factors made this system stand out: the ability to upgrade an existing kayak model with a pedal drive, the adjustability of the seat to dial in the ergonomics, and the addition of the Motorhead unit, which allows you to switch the drive from pedal driven to motor driven seamlessly. A lot of engineering went into this system and the result is a truly unique design that allows anglers to get into the sport and upgrade as they go.


Looking over the display boat the first thing I noticed is the boat itself. It was a standard desert camo Lure 11.5 with a rudder. In 2015 when Feelfree switched over to the new Sonar Pod, the intent was always to be able to upgrade to a pedal drive in the future. While every other manufacturer went the route of all new platforms for their pedal drives, Feelfree designed their system to work around their incredibly successful Lure line of kayaks. This means those of you who already have a Lure 11.5 or 13.5 with a Sonar Pod will be able to buy the Overdrive kit and drop it right in. It also means you are starting off with a proven paddle kayak and not sacrificing performance when floating rivers, skinny water fishing, or in heavy weeds.
I think the direction Feelfree took with the Overdrive System puts them into a unique position in the market, and paints a picture that they want to support their existing customers base, and not just profit from selling them another boat.


I had a few very candid conversations with head engineer Peter Murphy about the project. He explained to me a few of the major hurdles he had to overcome in order to pull this off.

One of the hurdles that he had to deal with was the ability to adjust the paddler to the pedals and to ensure that the ergonomics were ideal for pedaling, and paddling. They did this with a bracket that clicks into the notch where the rear of the gravity seat usually clips into. This bracket attaches easily to the seat and allows you to click the seat forward and backward in order to get the proper reach for the pedals. They also take advantage of the Feelfree Gravity Seat which allows for height adjustment to dial in the ergonomics and helps you get your hips in the most comfortable position for pedaling. This was something I struggled with in other pedal yaks. I always found myself compensating for my height by slouching in the seat. With the Feelfree you will be able to completely dial yourself in to the boat by adjusting the seat up and down and forward and back.



The most progressive thing about the Feelfree Overdrive System and the largest piece of engineering was the Motorhead unit. This electric drive unit plugs into the pedal system and turns the existing pedal drive into an electric trolling motor. The Motorhead clicks into the drive the same way a battery would click into a cordless drill. When in pedal mode the drive sits in the first click, when moved into the second click the drive disengages the pedals and takes over propelling the kayak, making it a seamless transition from pedal to power. It will come with a wired in remote control that allows you to adjust your speed and control forward and reverse. At Icast they had this setup on one of the boat's tracks with a Rail Blazer electronics holder, which looked clean and worked well. Final details about price and what all will be included in the kit is to be announced, and we will update our info when we get that. One thing we know for sure is that it works well. Jim Hager from Feelfree Kayaks sent us this video clip and says his GPS clocked him at 6 MPH on the water.

The last hurdle the engineers had to deal with was converting a foot controlled rudder to a hand controlled rudder. They did this by using the optional rudder that has been the standard upgrade on the Lure for years. They added a lever that attaches to the gunnel of the boat and clamps on to the rudder cable. Although I could tell it was 3D printed and prototyped, it was simple and effective in how if functioned. Most importantly it allowed for the standard foot controls to work when paddling. Here is my interview with Peter Murphy, the head engineer of the Overdrive project.

Other unique features:
-Pitch adjustment on the prop, which allows you to dial in the amount of grip the prop has depending on your leg strength or endurance.
-Transducer Mount on the front of the drive.
-Storage box that will slide into the pedal drive where the motor goes if you are doing pedal power only. (they didn't have this to show, but told us that it would be standard in the pedal drive kit)

At an Icast where pedal powered kayaks were all the rage, I feel like the Feelfree Overdrive stood alone as the most innovative. I know thousands of Lure 11.5 and 13.5 owners are going to be so stoked to be able to keep the boat they love, but now have the ability to pedal, paddle, or motor it. We are excited to see what this new drive means for the future of Feelfree and pedal kayaks as a whole. It sure is an exciting time to be a part of the kayak fishing industry!